iPhone 15 Pro Pairing Ready Replacement Battery

The iPhone 15 Pro pairing ready battery is an aftermarket 3274 mAh replacement cell with a pre-paired authentication chip. After correct installation, iOS displays 100% battery health and reads the cell as a recognised part. No Unknown Part warning appears, and no chip transfer or EEPROM programming is needed. Supplied by GA Tech NZ with same-day weekday dispatch and a 6-month manufacturing-defect warranty.

  • Displays 100% battery health in iOS Settings > Battery > Battery Health after correct installation.
  • Shows “Genuine Used Apple part” in Parts & Service History, with no Unknown Part warning.
  • Skips chip transfer, EEPROM programming, and pairing software. The pre-paired chip arrives factory-installed.
  • Ships with battery adhesive pre-installed on the cell, tested in-house through iOS 26.

Shipping info

Place your order by 2PM on business days for same-day dispatch. Tracked overnight delivery for only $8 urban areas or $13 rural locations, across New Zealand.

$32.00

5 in stock

5 in stock

More Info

The iPhone 15 Pro pairing ready battery is an aftermarket replacement cell with a pre-paired authentication chip. As a result, iOS reads the battery as recognised after correct installation and reports the diagnostics shown below.

What status will I see in iOS after installation?

iOS reportsWhyWhat it means for you
Parts & Service History: shows “Genuine Used Apple part”The pre-paired chip arrives with a valid identifier readable by iOSiOS verifies the part. No Unknown Part warning and no “unable to verify” message.
Settings > Battery > Battery Health: displays a real percentageiOS 18 onward shows battery health for this part typeHealth percentage stays visible across iOS updates.
Repair Assistant: completes normallyNo transfer or programming step is requiredInstall the battery, reconnect, and use immediately.
Important Information:

  • This is an aftermarket replacement battery cell with a pre-paired authentication chip factory-installed on the cell. This is not a genuine Apple battery replacement, and GA Tech NZ holds no affiliation with Apple Inc.
  • The pre-paired authentication chip allows iOS to read the battery as a recognised part. However, the cell itself is aftermarket and manufactured by the supplier, not by Apple.
  • Of course, iOS may display “Genuine Used Apple part” after installation. This iOS status describes the chip pairing only and does not certify the battery cell as Apple-manufactured.
  • Therefore, GA Tech NZ recommends professional installation to protect the surrounding flex cables and battery connector during repair. In addition, GA Tech NZ offers in-house iPhone 15 Pro battery replacement.
  • Battery adhesive arrives pre-installed on the cell. Consequently, no separate battery adhesive strips are needed for the install. Display adhesive (for resealing the screen) is sold separately.

iPhone 15 Pro pairing ready battery overview

This iPhone 15 Pro pairing ready battery fits Apple iPhone 15 Pro (model numbers A2848, A3101, A3102, A3104). The 15 Pro uses its own cell, separate from the 15, 15 Plus, and 15 Pro Max.

Specifically, the cell is a zero-cycle aftermarket Li-ion pack rated at 3274 mAh, 3.879 V nominal, 4.48 V charging cutoff, and 12.7 Wh, matching the original Apple cell specifications. As a result, runtime after installation tracks closely with the factory experience.

In particular, the pre-paired authentication chip is the differentiator. Since the chip arrives factory-installed with a valid identifier, iOS reports “Genuine Used Apple part” in Parts & Service History instead of the Unknown Part warning. In addition, Battery Health displays a real percentage in Settings, and Repair Assistant completes without any chip transfer or EEPROM programming step.

Why this matters for the iPhone 15 Pro

Apple’s strict battery-pairing checks apply across the iPhone 12 series and every model after. Because of that, a standard aftermarket battery without a paired chip will trigger the Unknown Part warning in Settings and hide Battery Health on the iPhone 15 Pro. By contrast, this pairing ready battery ships with a pre-paired chip, so the system reads the cell as a recognised part and shows the expected diagnostics. To confirm Apple-published specifications, see the Apple iPhone 15 Pro technical specifications or the iPhone 15 Pro listing on GSMArena.

NZ stock, dispatch, and in-house fitting

GA Tech NZ has supplied spare parts and repair services since 2017. Because GA Tech NZ holds local stock, weekday orders placed before 2pm ship the same day with tracked overnight delivery nationwide. In addition, buyers who want a professionally fitted result can book in-house iPhone 15 Pro battery replacement. Meanwhile, for related parts and repair tools, browse the iPhone parts and repair tools categories.

iPhone 15 Pro pairing ready battery specifications

SpecificationDetail
Product typePairing ready replacement battery (zero cycle)
Compatible modeliPhone 15 Pro (A2848, A3101, A3102, A3104)
Capacity3274 mAh
Rated voltage3.879 V
Charging cutoff voltage4.48 V
Watt-hours12.7 Wh
Authentication chipPre-paired authentication chip, factory-installed on the cell
Battery management ICTexas Instruments
iOS tested rangeiOS 18 through iOS 26
iOS Parts & Service statusDisplays “Genuine Used Apple part”
iOS Battery Health displayShows a real percentage
Chip transfer requiredNo (chip pre-paired and pre-fitted on the cell)
EEPROM programming requiredNo
Battery adhesivePre-installed on the cell
Display adhesive includedNo (sold separately for resealing the screen)
Compliance documentsStandard CE, FCC, UN38.3, MSDS, 1.2M drop test, and air transport documentation at supplier level
Warranty6 months against manufacturing defects

Compatible iPhone 15 Pro model numbers

This pairing ready battery fits the following Apple iPhone 15 Pro model numbers. The 15 Pro uses its own cell, separate from the 15, 15 Plus, and 15 Pro Max.

  • iPhone 15 Pro: A2848 (US), A3101 (CA / JP), A3102 (Other), A3104 (Global)

To confirm your model number before ordering, open Settings > General > About on your iPhone, then scroll down to Model Number. If the number starts with M or N, tap it once to reveal the A-number.

How to install the iPhone 15 Pro pairing ready battery

Generally, this installation guide is for trained technicians and experienced DIY repairers. Battery replacement requires opening the iPhone chassis and disconnecting the display, so GA Tech NZ recommends professional fitting for anyone who is not confident with full iPhone 15 Pro disassembly. In addition, GA Tech NZ offers in-house iPhone 15 Pro battery replacement through the phone repair services category.

  1. Prepare the workspace and tools. Use a clean, dust-free bench, a precision screwdriver kit, suction cup, opening picks, and plastic spudgers.
  2. Power off the iPhone and open the chassis. Remove the two pentalobe screws beside the USB-C port, apply gentle heat around the display perimeter, and use the suction cup to lift the screen carefully.
  3. Disconnect the battery and display. Remove the logic board shield, disconnect the battery flex first to isolate power, then disconnect the display and front sensor flex cables.
  4. Remove the old battery. Pull the adhesive release strips slowly outward at a low angle to release the original battery from the chassis. Avoid puncturing the cell.
  5. Seat the new pairing ready battery. Peel the protective backing from the pre-installed adhesive on the new battery, then place the cell in position. Take care not to crimp or fold the flex cable.
  6. Reconnect and test before closing. Reconnect the battery flex, display flex, and front sensor flex. Power on the iPhone, then open Settings > Battery > Battery Health and verify that the percentage and “Genuine Used Apple part” status both display correctly.
  7. Close the chassis. Reattach the logic board shield, reseal the display with fresh display adhesive (sold separately), and refit the two pentalobe screws to complete the install.

Compliance and testing

First, the supplier holds standard CE Declaration of Conformity (EU Council EMC Directive 2014/30/EU) and FCC Supplier’s Declaration of Conformity (FCC Part 15 Subpart B / ANSI C63.4:2014) for this battery line. In addition, the supplier holds standard lithium-battery transport and safety documentation, including UN38.3 test reports, MSDS, 1.2M drop test, and air transport identification under CNAS-accredited testing. As a result, the battery line ships with the compliance paperwork required for safe NZ courier transit.

Frequently asked questions

Does this battery show 100% health on iOS 26?

Yes, the iPhone 15 Pro pairing ready battery displays 100% battery health in Settings > Battery > Battery Health when fitted correctly. We have tested it in-house on iPhone 15 Pro across iOS 18 through iOS 26, and the percentage appears consistently because the pre-paired authentication chip keeps the reading stable across iOS updates.

Will it trigger the Unknown Part or “unable to verify” warning?

No. The battery carries a pre-paired authentication chip with a valid identifier, so iOS reads it as a “Genuine Used Apple part” in Parts & Service History. As a result, the Unknown Part warning and the unable-to-verify message do not appear after correct installation.

Do I need to transfer the original chip or run any programming?

No. The pre-paired authentication chip ships factory-installed on the new battery cell, so no chip transfer, EEPROM programming, JC-style restoration tools, or pairing software is required. Instead, install the battery with the standard repair workflow, reconnect the flex cable, and iOS recognises the new pack on first boot.

Is this a genuine Apple battery?

No. This is not a genuine Apple battery replacement. The battery cell is aftermarket and manufactured by the supplier, not by Apple. However, the pre-paired authentication chip ships factory-installed on the cell, and that chip pairing is what allows iOS to display 100% health and the “Genuine Used Apple part” status after correct installation.

Will this battery fit an iPhone 15 or iPhone 15 Pro Max?

No. The iPhone 15 Pro uses its own 3274 mAh cell. The standard iPhone 15 carries a 3349 mAh cell and the 15 Pro Max uses a 4422 mAh cell, both in different physical sizes.

Which iPhone 15 Pro model numbers does it fit?

This pairing ready battery fits iPhone 15 Pro A2848, A3101, A3102, A3104. Confirm your A-number in Settings > General > About before ordering.

What warranty applies?

GA Tech NZ provides a 6-month warranty against manufacturing defects on this iPhone 15 Pro pairing ready battery. However, the warranty does not cover physical damage, installation errors, or water damage. In addition, GA Tech NZ accepts change-of-mind returns on unopened parts in new unused condition within 7 days of receipt under the GA Tech NZ terms and conditions.

Account Login

Account Login

Part Request

Unable to find a part?

If you have any requests or enquiries about a product not shown here, please fill the form and we will get back to you with price and availability.