The iPhone 13 pairing ready battery is an aftermarket 3227 mAh replacement cell with a pre-paired authentication chip. After correct installation, iOS displays 100% battery health and reads the cell as a recognised part. No Unknown Part warning appears, and no chip transfer or EEPROM programming is needed. Supplied by GA Tech NZ with same-day weekday dispatch and a 6-month manufacturing-defect warranty.
Place your order by 2PM on business days for same-day dispatch. Tracked overnight delivery for only $8Â urban areas or $13 rural locations, across New Zealand.
$27.00
5 in stock
5 in stock
The iPhone 13 pairing ready battery is an aftermarket replacement cell with a pre-paired authentication chip. As a result, iOS reads the battery as recognised after correct installation and reports the diagnostics shown below.
| iOS reports | Why | What it means for you |
|---|---|---|
| Parts & Service History: shows “Genuine Used Apple part” | The pre-paired chip arrives with a valid identifier readable by iOS | iOS verifies the part. No Unknown Part warning and no “unable to verify” message. |
| Settings > Battery > Battery Health: displays a real percentage | iOS 18 onward shows battery health for this part type | Health percentage stays visible across iOS updates. |
| Repair Assistant: completes normally | No transfer or programming step is required | Install the battery, reconnect, and use immediately. |
This iPhone 13 pairing ready battery fits Apple iPhone 13 (model numbers A2482, A2631, A2633, A2634, A2635). The iPhone 13 uses its own cell, separate from the 13 mini, 13 Pro, and 13 Pro Max.
Specifically, the cell is a zero-cycle aftermarket Li-ion pack rated at 3227 mAh, 3.84 V nominal, 4.47 V charging cutoff, and 12.4 Wh, matching the original Apple cell specifications. As a result, runtime after installation tracks closely with the factory experience.
In particular, the pre-paired authentication chip is the differentiator. Since the chip arrives factory-installed with a valid identifier, iOS reports “Genuine Used Apple part” in Parts & Service History instead of the Unknown Part warning. In addition, Battery Health displays a real percentage in Settings, and Repair Assistant completes without any chip transfer or EEPROM programming step.
Apple’s strict battery-pairing checks apply across the iPhone 12 series and every model after. Because of that, a standard aftermarket battery without a paired chip will trigger the Unknown Part warning in Settings and hide Battery Health on the iPhone 13. By contrast, this pairing ready battery ships with a pre-paired chip, so the system reads the cell as a recognised part and shows the expected diagnostics. To confirm Apple-published specifications, see the Apple iPhone 13 technical specifications or the iPhone 13 listing on GSMArena.
GA Tech NZ has supplied spare parts and repair services since 2017. Because GA Tech NZ holds local stock, weekday orders placed before 2pm ship the same day with tracked overnight delivery nationwide. In addition, buyers who want a professionally fitted result can book in-house iPhone 13 battery replacement. Meanwhile, for related parts and repair tools, browse the iPhone parts and repair tools categories.
| Specification | Detail |
|---|---|
| Product type | Pairing ready replacement battery (zero cycle) |
| Compatible model | iPhone 13 (A2482, A2631, A2633, A2634, A2635) |
| Capacity | 3227 mAh |
| Rated voltage | 3.84 V |
| Charging cutoff voltage | 4.47 V |
| Watt-hours | 12.4 Wh |
| Authentication chip | Pre-paired authentication chip, factory-installed on the cell |
| Battery management IC | Texas Instruments |
| iOS tested range | iOS 18 through iOS 26 |
| iOS Parts & Service status | Displays “Genuine Used Apple part” |
| iOS Battery Health display | Shows a real percentage |
| Chip transfer required | No (chip pre-paired and pre-fitted on the cell) |
| EEPROM programming required | No |
| Battery adhesive | Pre-installed on the cell |
| Display adhesive included | No (sold separately for resealing the screen) |
| Compliance documents | Standard CE, FCC, UN38.3, MSDS, 1.2M drop test, and air transport documentation at supplier level |
| Warranty | 6 months against manufacturing defects |
This pairing ready battery fits the following Apple iPhone 13 model numbers. The iPhone 13 uses its own cell, separate from the 13 mini, 13 Pro, and 13 Pro Max.
To confirm your model number before ordering, open Settings > General > About on your iPhone, then scroll down to Model Number. If the number starts with M or N, tap it once to reveal the A-number.
Generally, this installation guide is for trained technicians and experienced DIY repairers. Battery replacement requires opening the iPhone chassis and disconnecting the display, so GA Tech NZ recommends professional fitting for anyone who is not confident with full iPhone 13 disassembly. In addition, GA Tech NZ offers in-house iPhone 13 battery replacement through the phone repair services category.
First, the supplier holds standard CE Declaration of Conformity (EU Council EMC Directive 2014/30/EU) and FCC Supplier’s Declaration of Conformity (FCC Part 15 Subpart B / ANSI C63.4:2014) for this battery line. In addition, the supplier holds standard lithium-battery transport and safety documentation, including UN38.3 test reports, MSDS, 1.2M drop test, and air transport identification under CNAS-accredited testing. As a result, the battery line ships with the compliance paperwork required for safe NZ courier transit.
Yes, the iPhone 13 pairing ready battery displays 100% battery health in Settings > Battery > Battery Health when fitted correctly. We have tested it in-house on iPhone 13 across iOS 18 through iOS 26, and the percentage appears consistently because the pre-paired authentication chip keeps the reading stable across iOS updates.
No. The battery carries a pre-paired authentication chip with a valid identifier, so iOS reads it as a “Genuine Used Apple part” in Parts & Service History. As a result, the Unknown Part warning and the unable-to-verify message do not appear after correct installation.
No. The pre-paired authentication chip ships factory-installed on the new battery cell, so no chip transfer, EEPROM programming, JC-style restoration tools, or pairing software is required. Instead, install the battery with the standard repair workflow, reconnect the flex cable, and iOS recognises the new pack on first boot.
No. This is not a genuine Apple battery replacement. The battery cell is aftermarket and manufactured by the supplier, not by Apple. However, the pre-paired authentication chip ships factory-installed on the cell, and that chip pairing is what allows iOS to display 100% health and the “Genuine Used Apple part” status after correct installation.
No. The iPhone 13 uses its own 3227 mAh cell, so this battery fits the iPhone 13 only. The 13 mini uses a smaller 2406 mAh cell and the 13 Pro uses a 3095 mAh cell, both with different physical sizes.
This pairing ready battery fits iPhone 13 A2482, A2631, A2633, A2634, A2635. Confirm your A-number in Settings > General > About before ordering.
GA Tech NZ provides a 6-month warranty against manufacturing defects on this iPhone 13 pairing ready battery. However, the warranty does not cover physical damage, installation errors, or water damage. In addition, GA Tech NZ accepts change-of-mind returns on unopened parts in new unused condition within 7 days of receipt under the GA Tech NZ terms and conditions.
If you have any requests or enquiries about a product not shown here, please fill the form and we will get back to you with price and availability.
