Replace a cracked or faulty iPhone 12 or iPhone 12 Pro screen with this Hard OLED display for a clear, bright, and responsive result. It features an oleophobic surface, polarised glass for easier viewing with sunglasses, COF structure for a slimmer fit, pre-fitted small parts for easier installation, and IC Transplant support to help avoid the display warning when fitted correctly. Supplied by GA Tech NZ with same-day weekday dispatch and a 12-month manufacturing-defect warranty.
Place your order by 2PM on business days for same-day dispatch. Tracked overnight delivery for only $8 urban areas or $13 rural locations, across New Zealand.
$80.00
Out of stock
Out of stock
The iPhone 12 / 12 Pro Hard OLED replacement screen is a premium aftermarket display built for the shared 6.1-inch OLED assembly used in the iPhone 12 and iPhone 12 Pro. It fits the iPhone 12 variants A2172, A2402, A2403, and A2404, as well as the iPhone 12 Pro variants A2341, A2406, A2407, and A2408. It arrives with the earpiece speaker mesh and the front sensor and camera bracket already fitted. As a result, installation prep takes less time than with a completely bare panel, and technicians can move straight into the remaining transfer and fitting steps.
The iPhone 12 and iPhone 12 Pro both use a 6.1-inch Super Retina XDR OLED display at 2532 × 1170 resolution and 460 ppi. Because both models support True Tone, strong brightness, and an oleophobic surface, screen quality has a direct effect on how natural the phone feels after repair. For example, low-grade replacement panels often show weaker brightness, poorer coating quality, or less accurate colour output. By contrast, a Hard OLED panel with 1:1 original resolution, 1:1 original thickness, oleophobic coating, and COF structure gives both models a closer-to-original result in daily use. For verified device specifications, see the iPhone 12 Pro article on Wikipedia or the GSMArena comparison of the iPhone 12 and iPhone 12 Pro.
GA Tech NZ has supplied spare parts and repair services since 2017, with local NZ stock and same-day weekday dispatch for orders placed before 2pm. Therefore, buyers across New Zealand can receive tracked overnight delivery nationwide. In addition, buyers who want a professionally fitted result can book in-house iPhone 12 or iPhone 12 Pro screen replacement. Meanwhile, for related parts and accessories, browse the phone accessories category.
| Specification | Detail |
|---|---|
| Product type | Replacement display panel |
| Quality grade | Premium aftermarket Hard OLED |
| Compatible models | iPhone 12 and iPhone 12 Pro |
| Supported variants | iPhone 12: A2172, A2402, A2403, A2404; iPhone 12 Pro: A2341, A2406, A2407, A2408 |
| Display size | 6.1-inch OLED |
| Resolution | 2532 × 1170 pixels |
| Pixel density | 460 ppi |
| Display features | True Tone support, high brightness, low power consumption, 1:1 original thickness, 1:1 original resolution, oleophobic coating, 360° sunglasses readable, COF structure |
| Pre-installed parts | Earpiece speaker mesh, front sensor and camera bracket |
| Additional repair feature | IC transfer-compatible flex cable for EEPROM restoration if needed |
| Adhesive included | No (display adhesive sold separately) |
| Warranty | 12 months against manufacturing defects |
This iPhone 12 / 12 Pro replacement screen uses Hard OLED construction, which gives buyers a stronger aftermarket option than budget LCD replacements. Because the panel matches the original iPhone 12 and iPhone 12 Pro display in size, resolution, and thickness more closely, the repaired phone keeps a more natural look and fit after installation. As a result, brightness, sharpness, and touch response stay more consistent in daily use.
Furthermore, the 1:1 original resolution and COF structure help the panel perform more like the factory screen than low-cost alternatives. In addition, the display includes an oleophobic coating and supports True Tone, so scrolling, typing, and media playback feel cleaner and more familiar after repair.
The included IC transfer-compatible flex cable also gives advanced technicians extra flexibility during EEPROM restoration workflows if needed. Consequently, the screen suits both standard installs and more technical bench repair work. Meanwhile, the pre-fitted earpiece speaker mesh and front sensor and camera bracket reduce installation prep time compared with completely bare display options.
iPhone 12 and iPhone 12 Pro owners with a cracked or damaged display. This replacement restores the phone to a higher-quality working condition than low-grade alternatives. Because both models share the same screen size and panel resolution, one display part can suit either phone when the fit is correct.
Repair shops and mobile technicians. Hard OLED gives technicians a stronger aftermarket option for fit, clarity, and daily responsiveness. Therefore, it suits repairs where the buyer wants better performance than a budget LCD screen.
DIY repair enthusiasts. The pre-fitted small parts simplify installation. However, GA Tech NZ still recommends professional fitting for buyers who are not confident with full device disassembly and reassembly.
| Feature | Hard OLED (this listing) | Soft OLED | Budget LCD |
|---|---|---|---|
| Panel type | Rigid OLED | Flexible OLED | LCD |
| Resolution match | 1:1 original resolution | Usually 1:1 original resolution | Often lower visual quality |
| Thickness | 1:1 original thickness | Usually close to original | Often thicker than original |
| True Tone support | Yes | Usually yes | Often limited or inconsistent |
| Oleophobic coating | Yes | Usually yes | Often weaker |
| Structure | COF | Flexible OLED build | Basic LCD structure |
| Warranty | 12 months at GA Tech NZ | Varies by supplier | Varies by supplier |
Overall, Hard OLED remains a strong choice for the iPhone 12 and iPhone 12 Pro because it preserves the original OLED experience more closely than LCD while keeping the product at a more accessible aftermarket tier.
This iPhone 12 / 12 Pro screen replacement suits trained repair technicians or experienced DIY repairers. Because the panel ships with the earpiece speaker mesh and the front sensor and camera bracket already fitted, setup time drops compared with a completely bare panel. However, the repair still requires careful handling of the original front sensor system and the remaining transferred parts. Therefore, GA Tech NZ recommends professional fitting for buyers who are not confident with full iPhone 12 or iPhone 12 Pro disassembly.
GA Tech NZ also offers in-house fitting for this part. Therefore, buyers can request fitting through the phone repair services category.
If you choose to install it yourself, note that this display does not include tools or adhesive. Instead, you’ll need a heat source or hot plate, suction cup, opening picks, plastic spudgers, a precision screwdriver kit, and display adhesive sold separately. Even so, careful preparation helps reduce avoidable installation mistakes.
This listing fits both the iPhone 12 and iPhone 12 Pro. The supported variants are iPhone 12 A2172, A2402, A2403, and A2404, plus iPhone 12 Pro A2341, A2406, A2407, and A2408. Because the iPhone 12 and iPhone 12 Pro share the same 6.1-inch OLED panel size, resolution, and front layout, the same physical replacement screen fits both models.
However, it does not fit the iPhone 12 mini, iPhone 12 Pro Max, iPhone 11 series, or any newer iPhone model with different display dimensions. Therefore, buyers should confirm their model number in Settings > General > About before ordering.
Tools, adhesive, and any additional transferred components do not ship with this part. However, GA Tech NZ stocks compatible repair tools separately.
This iPhone 12 / 12 Pro replacement screen carries a 12-month warranty against manufacturing defects. The warranty covers manufacturing faults only. However, it does not cover physical damage after delivery, installation errors, water damage, or wear caused by repeated removal and refitting.
In addition, GA Tech NZ accepts change-of-mind returns on unopened parts in new unused condition within 7 days of receipt, in line with the GA Tech NZ terms and conditions. Meanwhile, GA Tech NZ handles defective parts under its warranty process.
Hard OLED refers to a premium aftermarket OLED replacement tier that aims to match the original screen closely in size, thickness, clarity, and daily performance. Therefore, this panel supports True Tone, uses 1:1 original resolution at 2532 × 1170, and includes features like oleophobic coating and COF structure.
It fits the iPhone 12 variants A2172, A2402, A2403, and A2404, as well as the iPhone 12 Pro variants A2341, A2406, A2407, and A2408. Because both models share the same 6.1-inch OLED panel and front layout, the same physical screen fits each one.
No. Those models use different display sizes and different chassis dimensions. Therefore, this screen is sized for the iPhone 12 and iPhone 12 Pro only.
The display ships with the earpiece speaker mesh and the front sensor and camera bracket already fitted. However, it does not include the original Face ID sensor system itself. Therefore, the technician still needs to transfer the original front sensor assembly from the broken screen to complete the repair correctly.
The screen includes an IC transfer-compatible flex cable to support EEPROM restoration workflows if needed during advanced repair. Therefore, this feature is mainly useful for technicians using programmer tools during display-data restoration or calibration work.
Yes, when the original front sensor system from the phone is transferred correctly and remains undamaged. Face ID is tied to the original front sensor system, not to the replacement display itself. Therefore, careful handling during repair matters more than the screen grade here.
Yes, iOS may display a non-genuine part message after replacement. However, this is expected with aftermarket replacement screens and does not stop the display from working normally.
Yes. This Hard OLED replacement screen supports True Tone display, along with high brightness, low power consumption, and 1:1 original resolution for both the iPhone 12 and iPhone 12 Pro.
Yes. Display adhesive does not ship with this part, so it must be purchased separately to reseal the phone correctly.
Yes. GA Tech NZ offers in-house phone repair services for this model and, therefore, recommends professional fitting for buyers who want the lowest installation risk.
The screen carries a 12-month warranty against manufacturing defects. In addition, GA Tech NZ accepts unopened, unused change-of-mind returns within 7 days of receipt. However, installation errors, physical damage, and water damage are not covered.
If you have any requests or enquiries about a product not shown here, please fill the form and we will get back to you with price and availability.
