Local NZ Stock

Stocked in Queenstown

Daily Dispatch

2pm cut-off, overnight NZ

Quality Focused

Tested, warranty backed

Owned & Operated

Kiwi owned since 2017

GA Tech repair services

Phone Repair Queenstown, MacBook, Tablet & Game Console Repairs NZ

Need phone repair in Queenstown? GA Tech repairs iPhone, Samsung, OPPO and other mobile devices, plus MacBook, tablet, laptop and game console repairs. Choose Queenstown drop-off or courier send-in across New Zealand, then select your repair, request a fault assessment, or add an insurance report where needed.

iPhone 11 Pro Battery Adhesive Strips

Pre-cut stretch-release adhesive strips that hold the battery in the iPhone 11 Pro. A battery replacement uses up the old strips, so fit a new set every time the battery comes out. Sent from New Zealand stock.

  • Fits iPhone 11 Pro A2160, A2215 and A2217
  • Pre-cut to the battery: no trimming
  • Black pull tabs for removing the battery next time
  • Single use

Shipping Info

Place your order by 2PM on business days for same-day dispatch. Tracked overnight delivery for only $8 urban areas or $13 rural locations, across New Zealand.

SKU: GA7-Fi109 Category: Tag:

$2.00

31 in stock

31 in stock

About the iPhone 11 Pro battery adhesive strips

These pre-cut battery adhesive strips hold the battery firmly in the iPhone 11 Pro, so it cannot shift inside the phone. The factory strips are stretched out as the battery comes out and cannot be used again, so every battery replacement needs a new set. So does refitting the original battery after a repair that meant taking it out.

Each strip ends in a black pull tab. When the battery has to come out again, pulling the tabs stretches the strips until they let go, which is far safer than prying against the battery.

You get one pre-cut set of strips on its liner, as pictured. They are single use: once they are stuck down, they cannot be lifted and repositioned.

Which iPhone 11 Pro models it fits

iPhone 11 Pro model numbers A2160, A2215 and A2217. Find yours in Settings, then General, then About: tap the number shown until it starts with an A.

Match the adhesive to your exact model. We also stock battery adhesive for the iPhone 11 and iPhone 11 Pro Max.

How the old battery comes out

The battery in the iPhone 11 Pro is held by stretch-release strips. Pull each black tab slowly and steadily at a low angle, keeping the strip flat: it stretches and lets go of the battery. If a strip snaps, a few drops of high-concentration isopropyl alcohol under the battery soften what is left after a minute or so.

Never pry against the battery, bend it or puncture it. A damaged lithium battery can catch fire.

How to fit the iPhone 11 Pro battery adhesive strips

  1. Clear the old adhesive. Remove every piece of old strip and residue from the battery recess.
  2. Clean and dry. Wipe the surface with high-concentration isopropyl alcohol and let it dry completely.
  3. Stick the strips to the battery. Peel off the main liner and press the strips onto the back of the battery, with the black pull tabs sitting past the edge. Line them up first: once they touch, they cannot be peeled off and repositioned.
  4. Seat the battery. Peel off the remaining liner, set the battery into its recess and press it down evenly.
  5. Reconnect and test. Reconnect the battery and check that the phone powers on and charges before you close it.

Spudgers and tweezers are in our repair tools range. Rather have us do it? See iPhone repair prices.

Frequently asked questions

Do I need new battery adhesive strips when I replace the battery?

Yes. The old strips stretch out as the battery comes out and will not hold again, so every battery replacement needs a new set.

What if a pull tab snaps?

Pull any remaining strips slowly at a low angle. Where a strip has broken off, a few drops of high-concentration isopropyl alcohol under the battery soften the adhesive after a minute or so. Never pry against the battery or bend it.

Does your iPhone 11 Pro replacement battery come with adhesive?

Yes. Our iPhone 11 Pro replacement battery has the adhesive already applied. These strips are for refitting a battery without it, such as the original battery after a repair that meant taking it out.

How do I find my iPhone model number?

Open Settings, then General, then About, and tap the number shown until it starts with an A. Match it to the model numbers listed on this page.

Can you fit the battery for me?

Yes. We replace iPhone batteries: see iPhone repair prices for the models we fit and what it costs.

Reviews

There are no reviews yet.

Be the first to review “iPhone 11 Pro Battery Adhesive Strips”

Your email address will not be published. Required fields are marked *

Account Login