The Google Pixel 10 Pro replacement screen with Obsidian frame is an OEM Service Pack quality display assembly for the 6.3-inch LTPO AMOLED Pixel 10 Pro. It comes with the frame, side buttons, earpiece mesh, speaker mesh, and ultrasonic in-display fingerprint sensor already fitted, which reduces installation time compared with bare-panel alternatives. Available from GA Tech NZ with same-day weekday dispatch and a 12-month manufacturing-defect warranty.
$221.00
On pre-order
Place your order by 2PM on business days for same-day dispatch. Tracked overnight delivery for only $8Â urban areas or $13 rural locations, across New Zealand.
On pre-order
The Google Pixel 10 Pro replacement screen with Obsidian frame is an OEM Service Pack quality display assembly for the Pixel 10 Pro variants GEHN3, G4QUR, and GN4F5. It includes the frame, side buttons, earpiece mesh, speaker mesh, and ultrasonic in-display fingerprint sensor already fitted. As a result, installation takes less time than with bare-panel alternatives. In turn, technicians get a more complete assembly to work with from the start.
The Pixel 10 Pro uses a 6.3-inch LTPO AMOLED display at 2856 × 1280 resolution with 120Hz refresh and 3,300 nits peak brightness. It also uses an ultrasonic in-display fingerprint sensor. Because of that, screen quality matters more than on older Pixel generations. For example, poor-quality replacement panels often cause weaker brightness, less consistent colour, reduced 120Hz responsiveness, or unreliable fingerprint performance. By contrast, OEM Service Pack quality helps preserve the original display experience more closely. For verified device specifications, see the Pixel 10 Pro article on Wikipedia or the Google Pixel 10 Pro listing on GSMArena.
GA Tech NZ has supplied spare parts and repair services since 2017, with local NZ stock and same-day weekday dispatch for orders placed before 2pm. Therefore, buyers across New Zealand can receive tracked overnight delivery nationwide. In addition, buyers who want a professionally fitted result can also book in-house Pixel 10 Pro screen replacement. Meanwhile, for other compatible parts, browse the other brand parts category.
| Specification | Detail |
|---|---|
| Product type | Replacement display assembly with frame |
| Quality grade | OEM Service Pack |
| Compatible model | Google Pixel 10 Pro (GEHN3, G4QUR, GN4F5) |
| Display size | 6.3-inch LTPO AMOLED |
| Resolution | 2856 × 1280 pixels |
| Refresh rate | 120Hz LTPO adaptive |
| Peak brightness | 3,300 nits |
| Fingerprint sensor | Ultrasonic in-display sensor pre-installed in the assembly |
| Frame colour | Obsidian |
| Pre-installed components | Frame, side buttons, earpiece mesh, speaker mesh, ultrasonic in-display fingerprint sensor |
| Adhesive included | No (back-cover adhesive sold separately) |
| Warranty | 12 months against manufacturing defects |
This Pixel 10 Pro replacement screen uses OEM Service Pack quality, which sits at the highest replacement display tier commonly available outside direct manufacturer channels. Because it matches the original Pixel 10 Pro display in resolution, refresh rate, brightness output, and fit more closely than lower-grade alternatives, it helps preserve colour accuracy, brightness uniformity, and 120Hz responsiveness after installation.
Furthermore, the Pixel 10 Pro relies on an ultrasonic in-display fingerprint sensor. Because this assembly includes the sensor pre-installed and uses OEM Service Pack quality panel tolerances, it is better suited to maintain reliable fingerprint performance after correct fitting. By comparison, cheaper Hard OLED and Soft OLED alternatives often create slower recognition or outright sensor failure.
In addition, the pre-fitted frame, side buttons, and meshes also reduce installation time compared with sourcing each part separately. Consequently, the repair process starts from a more complete assembly.
Pixel 10 Pro owners with a cracked or damaged display. This replacement restores the original screen assembly more closely than a bare panel or lower-grade aftermarket option. As a result, it suits buyers who want a more complete and reliable repair.
Repair shops and mobile technicians. OEM Service Pack quality gives technicians a stronger replacement option for preserving ultrasonic fingerprint function, display brightness, and 120Hz responsiveness. Therefore, it suits repairers who want fewer issues after fitting.
DIY repair enthusiasts. The pre-fitted frame, meshes, and fingerprint sensor simplify installation. However, GA Tech NZ still recommends professional fitting for buyers who are not confident with full device disassembly.
| Feature | OEM Service Pack (this listing) | Aftermarket Hard OLED | Aftermarket Soft OLED |
|---|---|---|---|
| Panel quality | Factory-grade LTPO AMOLED | Rigid OLED, slight colour drift | Flexible OLED, closer to original |
| Brightness | Up to 3,300 nits peak | Typically lower, 1,000 to 1,800 nits | Often comparable to original |
| 120Hz refresh | Preserves the original 120Hz | Sometimes caps at 90Hz | Usually preserves 120Hz |
| Ultrasonic fingerprint | Pre-installed and reliable | Often unreliable | Variable, depends on panel quality |
| Frame and meshes | Pre-installed | Sometimes bare panel only | Sometimes bare panel only |
| Lifespan | Closest to original device life | Shorter expected life | Mid-range expected life |
| Warranty | 12 months at GA Tech NZ | Varies by supplier | Varies by supplier |
Overall, OEM Service Pack remains the recommended grade for the Pixel 10 Pro because the ultrasonic fingerprint sensor and 120Hz LTPO panel both depend on precise factory tolerances. In other words, this listing prioritises restored function over lower upfront cost.
This Pixel 10 Pro replacement screen suits trained repair technicians or experienced DIY repairers. Because the frame, meshes, and ultrasonic fingerprint sensor come pre-installed, setup time drops. However, the repair still requires careful transfer of the remaining original components. Therefore, GA Tech NZ recommends professional fitting for buyers who are not confident with full Pixel 10 Pro disassembly.
GA Tech NZ also offers in-house fitting for this part. Therefore, buyers can request fitting through the phone repair services category.
If you choose to install it yourself, note that this assembly does not include tools or adhesive. Instead, you will need a heat source or hot plate, suction cup, opening picks, plastic spudgers, a precision screwdriver kit, and back-cover adhesive sold separately. Even so, careful preparation helps reduce avoidable installation mistakes.
This listing fits the Google Pixel 10 Pro in the following variants: GEHN3 (Global TD-LTE), G4QUR (US Verizon), and GN4F5 (Japan). Because all three variants share the same 6.3-inch LTPO AMOLED display assembly and chassis dimensions, the same physical display assembly fits across all three.
However, it does not fit the Google Pixel 10, Pixel 10 Pro XL, Pixel 10 Pro Fold, or any Pixel 9 series device. Therefore, buyers should confirm their model number in Settings > About phone > Model number before ordering.
The Obsidian frame matches the Obsidian Pixel 10 Pro cosmetically. However, it also fits Porcelain, Moonstone, and Jade Pixel 10 Pro phones physically. Therefore, buyers should expect a cosmetic frame-colour mismatch if they choose this version instead of a matching-colour frame.
Tools, adhesive, and pull-tab accessories do not ship with this part. However, GA Tech NZ stocks compatible repair tools separately.
This Pixel 10 Pro replacement screen carries a 12-month warranty against manufacturing defects. The warranty covers manufacturing faults only. However, it does not cover physical damage after delivery, installation errors, water damage, or wear caused by repeated removal and refitting.
In addition, GA Tech NZ accepts change-of-mind returns on unopened parts in new unused condition within 7 days of receipt, in line with the GA Tech NZ terms and conditions. Meanwhile, GA Tech NZ handles defective parts under its warranty process.
OEM Service Pack refers to the highest replacement display tier commonly available outside direct manufacturer channels. Therefore, it is designed to match the original Pixel 10 Pro display more closely in resolution, refresh rate, brightness, fit, and fingerprint sensor performance.
It fits the Pixel 10 Pro variants GEHN3, G4QUR, and GN4F5. Because all three use the same 6.3-inch LTPO AMOLED display assembly, the same part fits each one.
No. Those models use different display assemblies and different chassis dimensions.
The assembly includes the frame, side buttons, earpiece mesh, speaker mesh, and ultrasonic in-display fingerprint sensor already fitted.
Yes, when the assembly is installed correctly. Therefore, OEM Service Pack quality is recommended over cheaper aftermarket alternatives for the Pixel 10 Pro.
Yes, in most cases. After screen replacement, buyers should delete old fingerprints and then register them again so recognition stays fast and accurate.
Physically, yes. However, this listing uses an Obsidian frame, so buyers should expect a cosmetic mismatch unless they choose a matching-colour version.
Yes. Back-cover adhesive does not ship with this part, so it must be purchased separately.
Yes. GA Tech NZ offers in-house repair services for this model and, therefore, recommends professional fitting for buyers who want the lowest installation risk.
The screen carries a 12-month warranty against manufacturing defects. In addition, GA Tech NZ accepts unopened, unused change-of-mind returns within 7 days of receipt. However, installation errors, physical damage, and water damage are not covered.
If you have any requests or enquiries about a product not shown here, please fill the form and we will get back to you with price and availability.
